SETTING NETWORK OR TCP/IP CONFIG

After connecting the cable preparation is completed the next step dalah setting the Network ID. Both in connection PC to PC or PC to Hub is IP config settings are basically the same because we are basically connecting a device to communicate workstation.
Step - step Setting the IP Address
•  Click start - connect to - Show all Connections
•  Right click on the Local Area Network - Properties - Internet Protocol (TCP / IP)
•  Fill in the IP address in the box by selecting the "Use the following IP address", to fill the computer's IP address as the default one we consider to be the gate away (server) and a second computer as a client, we provide public class C IP address is 192.168 .0. x .....
For example we are setting the first IP address in 1 computer as a server

 

After that we set the IP address on the computer 2 as a client;

 

Once completed, check the connection between client - server IP address with the ping command